Align Trex 600 Helicopter Spare Parts

For mounting a gyro, Increasing the strength of the main frame structure. It also includes shorter body posts to pull the rear of the canopy in a little to give more clearance on servos. Suitable for T-Rex 600 Nitro.

Use for T-REX 600 Nitro metal main rotor holder. Linkage ball F(M3.5x4) x 2(F4.75x20.25mm)

Damper rubber x 2(F8xF13x6.5mm), Spacer x 2(F8xF11.5x1.3mm)

Use for T-REX 600 Nitro, this item allows you to remove the anti-rotation device for the swashplate from your helicopter.

Feathering Spindle Trex 600

T-REX metal tail pitch assembly features high precise bearing structure and high rigid CNC processes aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight.

Replacement bearings for the Tail Drive Gear Assembly

Replacement bearings for the Tail blade assembly

Replacement Bearings for the Main Shaft

New Landing Skid Plastic White

Torque Tube Rear Drive Gear Set White

Auto Charger for the T-Rex 600 Night Blades, either powered from a suitable 12V battery or the mains. Please note mains adapter requires a 2 pin adaptor.

Torque Tube Front Gears (3) White

T-REX metal main rotor holder features high precise bearing structure and high rigid CNC processes aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight. Use for T-REX 600/600 Nitro