FG Modelsport Cars

The open bodyshell with the metal roll cage as well as the gigantic rims with low-profile knobbed tires give the Baja Buggy its unmistakable striking looks. The model is based on the 1:6 Marder chassis from which most of the chassis parts have been applied. Of course driving fun has top priority just the same as with all our 1:6 Off-Road models.

(Available on 7 day delivery option. Call for details.)

Off road, rough road action is ever-popular, so if you’re looking for a vehicle to suit, FG’s range of buggies, race and monster trucks are sure to please! Choose from a selection that are supplied factory assembled and ready to run with a powerful and torquey Zenoah 26cc pullstart petrol engine and Futaba 40MHz radio already installed and almost-ready-to-run

Built on a tough 4mm angled countersunk alloy chassis with double wishbone suspension front and rear, coupled to four oil filled shock absorbers to soak up the worst off-road conditions, these machines lap up the worst conditions you can throw at them! For long life and smooth running, all rotating parts are ballraced and the rear gears and diff gears are case hardened for longer life. Close fitting body shells and guards ensure that the transmission and other chassis parts are protected from dust and dirt.

The included Zenoah 26cc pullstart engine runs on an economical two stroke petrol/oil (25:1) mix. With their large volume petrol tanks, you have around 45 minutes of driving fun per fill with these superb off roaders!

Specification
Wheel Base: 475mm
Width: 420mm

Length: 690mm
Height: 270mm

(Available on 7 day delivery option.Call for details)

The Stadium Hummer H2 only differs in the slightly smaller profile tire equipment and the modified gear transmission ratio to the Monster Hummer.

All chassis parts are mounted on a 4mm angled alloy plate. All borings on the lower side are countersunk in order to prevent the screw heads from sticking out. At the front axle you have the possibility to adjust toe-in or toe-out through track rods with right-/left-handed thread, at the rear axle you can modify king pin angle and toe-in through adjusting screws. 8 oil-pressure shock absorbers are mounted at the lower double wishbones of front and rear axle which can absorb also heavier bumps to a great extent and ensure an optimal road grip. All rotating parts are supported by ball bearings. Rear gearwheels, differential gears and all driving components are case-hardened. The alloy side plates protect the rc system as well as the tank. Monster and Stadium Hummer are delivered with chrome-plated rims, the Street version has rims in silver colour.

The models are equipped with a powerful 26ccm combustion engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.

(Available on 7 day delivery option.Call for details)

All chassis parts are mounted on a 4mm angled alloy plate. All borings on the lower side are countersunk in order to prevent the screw heads from sticking out. At the front axle you have the possibility to adjust toe-in or toe-out through track rods with right-/left-handed thread, at the rear axle you can modify king pin angle and toe-in through adjusting screws. 8 oil-pressure shock absorbers are mounted at the lower double wishbones of front and rear axle which can absorb also heavier bumps to a great extent and ensure an optimal road grip. All rotating parts are supported by ball bearings. Rear gearwheels, differential gears and all driving components are case-hardened. The alloy side plates protect the rc system as well as the tank. Monster and Stadium Truck are delivered with chrome-plated rims, the Street version has rims in silver colour.

The models are equipped with a powerful 26ccm combustion engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.