Futaba Radios

Futaba's great value 2 channel radio control system includes a transmitter, R122JE receiver, 2 x S3003 servos, and battery box.

A full package inc 4 x 3003 servos , Nicads and 7 Ch Rx.
The new 6EXP has been selected as Futaba’s first 2.4GHz aircraft/
helicopter system, and utilises the highly advanced FASST (Futaba
Advanced Spread Spectrum Technology) system to give the
ultimate in performance and control. Allowing switch on and go
operation, and with amazing interference rejection, this set will
become the standard by which all others are measured.

The tiny R606FS receiver weights only 9.8g (7g without case),
but is a full range receiver that works every bit as well in normal
or giant scale models, allowing simple swaps between models.

This set has only the Tx and Rx , no servos included.
The new 6EXP has been selected as Futaba’s first 2.4GHz aircraft/
helicopter system, and utilises the highly advanced FASST (Futaba
Advanced Spread Spectrum Technology) system to give the
ultimate in performance and control. Allowing switch on and go
operation, and with amazing interference rejection, this set will
become the standard by which all others are measured.

All the functions and features of Futaba’s current 35MHz Field Force 7... but now on 2.4GHz and with even more extras! Other than the short 2.4GHz aerial, it feels just like its best-selling predecessor and the characteristic large LCD, 10 model memory and easy-to-use jog dial remain unchanged. However, it now benefits from the addition of an ailevator mix (two elevator/tailplane halves acting as both ailerons & elevators), a new swash > throttle mix and govenor control.

No corners cut - the new 2.4GHz FF7 is supplied complete with Futaba’s new
lightweight R617FS 2.4GHz receiver and four high torque S3152 digital servos!
Superior ‘channel-hopping’ operating frequency changes every 2 milliseconds - unlike other less advanced systems that operate on one or two fixed frequencies.

High specification system complete with four S3152 digital servos, R617FS 2.4GHz receiver, rechargeable transmitter and receiver packs, mains charger, switch and accessories

This set has only the Tx and Rx , no servos included.
All the functions and features of Futaba’s current 35MHz Field Force 7... but now on 2.4GHz and with even more extras! Other than the short 2.4GHz aerial, it feels just like its best-selling predecessor and the characteristic large LCD, 10 model memory and easy-to-use jog dial remain unchanged. However, it now benefits from the addition of an ailevator mix (two elevator/tailplane halves acting as both ailerons & elevators), a new swash > throttle mix and govenor control.
Superior ‘channel-hopping’ operating frequency changes every 2 milliseconds - unlike other less advanced systems that operate on one or two fixed frequencies.

The new and innovative Futaba 8FG is the perfect radio for those sport pilots looking to take the next step forward in their flying, as it offers full 8 channel FASST 2.4Ghz performance, allied to trend setting new styling and fast and ultra simple programming with its unique touch sensor input.

The new and innovative Futaba 8FG is the perfect radio for those sport pilots looking to take the next step forward in their flying, as it offers full 8 channel FASST 2.4Ghz performance, allied to trend setting new styling and fast and ultra simple programming with its unique touch sensor input.

Just arrived this week, the new and innovative Futaba 8FG is the perfect radio for those sport pilots looking to take the next step forward in their flying , as it offers full 8channel FASST 2.4Ghz performance, allied to trend setting new styling and fast and ultra simple programming with its
unique touch sensor input. Supplied complete with the new R6008HS receiver and 4 S3001 servos, thetransmitter is fitted with 1700mAh Ni-MH for extended operating time. FeaturesJust a few of the many features of this superb new set are listed below.

Ripmax 60th Anniversary is celebrated by the release of the Futaba 10CG dedicated FASST 2.4GHz radio set. A Full 10 channel system that boasts the rock solid stability of Futaba’s 2.4GHz FASST system!
Comes with 14 ch Rx

Ripmax 60th Anniversary is celebrated by the release of the Futaba 10CG dedicated FASST 2.4GHz radio set. A Full 10 channel system that boasts the rock solid stability of Futaba’s 2.4GHz FASST system!

Supplied on 2.4GHz with the lastest, 21g R6014HS receiver and four digital servos. With a full 10 channels and FASST transmission it has a large, backlit custom LCD screen and highly effective jog-dial to make navigation between menus simple.

This set has only the Tx and 14ch Rx , no servos included.
Taking 12 Channel Control to the Next Level!
Brand New 2.4GHz Version Now Available
Supports 13 wing types, 3 tail types, and 8 heli swash types

The world renowned Futaba14MZ becomes yet more appealing as it is now available in 2.4GHz format, using Futaba's highly developed FASST frequency hopping system. The use of this superb system with the 14MZ allows use of any of the wide range of Futaba 2.4GHz aircraft receivers, from the tiny and super light R6004FF right up to the amazing R6014FS receiver, which despite its full 14 channel capability weighs a mere 21g!

All of the other advantages of the 14MZ are retained in this new version, noteworthy amongst these being the ability to upgrade the software using updates available on the internet, this investment in a top quality radio ensures you are able to take advantage of new software developments as they happen!