Helicopter Accesories

3G USB link cable incorporates a PC configuration GUI (graphical user interface) and the latest 3G firmware update (V2.1) to improve system stability, and added pirouette compensation to stabilize center point during pirouettes. This unit also allows full programmability of all the features of the 3G System from the PC.

An absolute MUST for any beginner. This durable training undercarriage uses high impact glass fibre struts with high visibility balls to give your model a a wide, stable base and aid orientation. Supplied complete with all required fittings.

Supplied in a dropper bottle with cap
Absolutely essential for model helicopters and cars, also for all other metal to metal applications. Friction reduced 8 fold, use on Main shafts, Tail shafts etc.

Unit is fitted with an internal rechargable battery.
Precision pulse generator to test and centre servos during bench setup.
Aero Propeller tachometer up to 6 blades and 34000 RPM.
Heli Rotor blade tachometer. Precision tachometer up to 4000 RPM headspeed

JP High Quality Starter Probe with One-Way Bearing

CarbSmart
Controls fuel mixture by monitoring cylinder head temperature.
Simplifies mixture adjustment.
Helps protect engine
Makes mixture less critical to weather changes.
Allows higher, more consistent, power output.
Requires a servo and linkage for use,
does not require a radio channel.
Size 21 x 30 x 4 mm, 5g

CarbSmart is used in conjunction with a servo connected to the main needle of the carburettor to adjust the mixture in flight dependant on the cylinder head temperature. The unit has a user selectable target temperature. When the head is below the target temperature the unit moves the mixture towards the leaner direction. The extent to which this is allowed is again user adjustable. As the head reaches the target temperature the mixture is richened to the standard setting and as the head temperature exceeds the target value the mixture continues to richen until a user adjustable limit is reached. The gain of the system is also user adjustable.
Supplied with sensor, power lead, mounting foams and throttle arm.

Bolt on the Headloader in place of your existing blades to simulate the load of the blades without lift or cyclic effect

* Set up engine on the ground
* Set full throttle mixture quickly and accurately
* Check for glitches, vibration and static problems
* Pick up potentially dangerous problems safely