Clearance Sale Items

This is a brand new boxed standard 7ch Version 1.0 but can be upgraded easily.
Set includes 4 x MPX Red Mini HD servos
The MULTIPLEX ROYAL evo entry-level RC systemThe new ROYAL evo 7 offers a low-cost path into the
latest, totally up-to-date line of radio control systems from MULTIPLEX - the ROYAL evo. The ROYAL evo 7 must be the first choice for the ambitious weekend pilot, whether your preference is for power models, gliders or helicopters1 ROYAL evo 7 transmitter

1 HFM-4 crystal RF module
1 6/1500 mAh NiMH transmitter battery
1 220v AC charger
1 1700 Rx Pack and sw harness
1 Micro IPD (UNI) 7ch receiver
4 x Mini HD servos

The TUNING brushless power set for the EasyStar offers the advanced modeller a generous excess of power for simple aerobatics and flying in windy weather. Compared with the PERMAX 400/6V motor this very reasonably priced system gives you more than twice the power, capable of whisking your model up to a considerable altitude in just a few seconds. The set includes the matching LiPo battery.
Current drain with 3S LiPo and supplied propeller: approx. 17 A

Within a very short time the EasyGlider electric became one of the most popular planes in its class. Many pilots asked for a more powerfull equipment. Here it is. It offers approx. 3times more power than the the regular one. Recommended battery is LiBATT 2/ 2000 mAh

„BLIZZARD TUNING“ power set
The high-power motor system for the skilled model pilot
and fast models weighing up to around 1100 g, such as the
BLIZZARD. The power set is designed with maximum performance
in mind, and the components take the BLIZZARD
into realms of speed you never imagined possible: this system
really does provide impressive acceleration even when
the model is climbing vertically. Current drain with 3S LiPo
and supplied propeller: approx. 42 A.

„EASYGLIDER PRO“ power set
This power set for the beginner is a great choice for the Easy-
Glider PRO. It is capable of pulling the model up to a good
starting altitude six to eight times - depending on the flight
battery - for extended thermal flights. Current drain with 2S
LiPo and supplied propeller: approx. 19 A.

For Trex 500 or Protos

As with the GY350 & GY351 the GY352 incorporates both the SMM sensor technology as well as Futaba's AVCS control system. However, its main feature is its Dual Axis capability. Incorporating two SMM sensors mounted in different planes allows the control of two axis on the aircraft and so by mounting the gyro in different positions Aileron and Elevator or Elevator and Rudder could be gyro assisted at the same time. Still incredibly small and light the GY352 will be welcomed by large model and jet fraternities who currently have to use two gyros.

Transfers data between Radio and Pc

Hitec buddy lead for connecting two transmitters with round DIN type buddy ports

GWS Transmitter Trainer lead (Buddy Box Lead)
Suits - Futaba to Futaba radio (Round Plug to Round Plug)
Length - 75cm

This is a In-Cowl .61-.75 Muffler for the
Top Flite P-40 Warhawk, P-51 Mustang and AT-6 Texan.

FEATURES: Completely Conceals Inside the Cowl
Bolts Directly to the Firewall for Maximum Security
Can-Type Cylinder
For use on .60-.75 2-Stroke Engines. ** NOT FOR .90 OR LARGER **

Introducing the World's First Stereoscopic 3D R/C Flight Simulator - The biggest advance in R/C Simulators for years!

Amazing Stereoscopic 3D flight mode!
Can be run using either cyan/red 3D glasses or 3D shutter glasses
Includes around 50 helicopters, 50 planes including gliders
The Ultimate realism with astounding blade and rotor simulations
Amazingly natural smoke and scintillating sound - the best yet!
Stereoscopically 3D enhanced sceneries for REAL depth!
Runs on Windows XP, Vista, or Windows 7
Requires minimum Direct X 3D compatible graphics card - see details

The Thunder Tiger GP-42 engine is designed to combine high performance with easy handling and maintenance using CAD computer technology. Major components of the engine are machined from the highest quality materials using state-of-the-art CNC manufacturing techniques, resulting in consistent-high quality and reliability.

The GP-42 engine is equipped with maintenance-free bronze bushings, Schnuerle porting, a special ABN type piston and cylinder sleeve, an easily adjusted air bleed carburetor, and a safe angular needle valve. The GP-42 engine has been specifically-designed to suit both beginners and experienced modelers

The Irvine engine range has evolved again, but this time there's a difference... The latest engines are now manufactured by O.S. to an Irvine design!! By maintaining the successful design concept of their
predecessors, the Irvine 40 ABC MkIV maintains the Irvine tradition, but has been able to adopt some new technology into the designs. There's now the latest multi-layer, ringless piston/liner design, a simplified and lighter C40H carburettor, which still provides accurate and progressive throttle response, plus a modified and improved crankshaft.

C.C. - 7.50
Bore - 22.25
Stroke - 19.28
Power (kW) - 1.18/16,500
R.P.M. - 2000-12800
Weight - 443g
Rec Prop - 11 x 6

The legendary Easy Pigeon ready-made electric glider is suitable for beginners and sports pilots.
It has a factory-fitted electric flight motor with folding prop and spinner as well as factory-fitted pushrods, control surfaces, control horn, servo trays plus finished and covered 3-panel plug-in wings. This means no building, no sanding, no painting, no gluing and no covering is required by you!

If you’re not that brilliant at flying yet, don’t worry - the super strong, blow-moulded polypropylene fuselage is virtually indestructible!
Just add R/C and battery of your choice!

This piezo gyro is perfect for .30~.50 size I/C and larger electric helicopters and benefits from all of Futaba's experience in producing market leading gyros. The G191 is small and light - weighing only 10g, and utilises a miniature piezo-electric sensor which exhibits minimal temperature drift giving greater stability in operation. The inclusion of a reversing switch gives increased flexibility and simplicity of installation.

P-R604FS/2-4G

The Micro R114F receiver adds a new category to the Futaba range. This 40MHz version is ideal for smaller cars. This high quality receiver weighs only 10.9g with case and crystal. 2/3 size crystals can be used to minimize weight.

The flying wing for ultimate slope and electric flying fun

At many slopes and flat-field flying sites you will find dozens of flying wings. These models are usually cut from various grades of foam and stiffened with parcel tape. The Xeno is a superior version: more elegant, of higher technical quality, and offering loads of convenience as well as excellent flying fun.
When designing the Xeno we made good creative use of the possibilities of 3-D CAD / CAM techniques and modern foam moulding technology. The result is an interesting shape with an unmistakable appearance.
For ease of transport the Xeno can simply be folded together in a few seconds, and in this state it can be carried safely and conveniently in a rucksack or similar.

If you are looking for a model that could get your pulse beating then have a close look at this eye-catching and fully aerobatic SUPER STAR aircraft by SEAGULL models.
This model is designed and built using the latest state of the art C.A.D. software and LASER cutting equipment ensuring a light but strong airframe that will withstand the most demanding aerobatic stresses while in the air.
The large control surfaces ensure a flight performance at low and high speed that will keep any pilot entertained while pushing the flight envelope.
Factory finished in this attractive high visibility colour scheme covered with PROFILM.

Turbine-powered model aircraft are steadily gaining in popularity,
but many modellers are not prepared to pay the price of a
small car to get one into the air.
The Twister is of ELAPOR® foam construction, and gives you
all the “turbine” fun you could desire for little more than pocketmoney.

The MkII version of the popular Irvine 150 shares the same design criteria as its predecessor by offering solid performance in a compact package, but takes the concept a step further by optimising the crankcase gas passages to ensure maximum power, yet retain a high gas flow for improved throttle response

SAB CARBON / KEVLAR composite blades with graphite coloured inboard section,carbon "flash" and white outboard section for excellent visibility.

The combination of carbon and kevlar make these blades very stiff and ideal for agressive sports and 3D flying.

Perfect for most "50" size helis

To add to their range of amazing electric EP model aircraft Seagull have introduced this superb INNOVATOR Electric trainer model and as the name implies, New and exciting INNOVATING design and assembly techniques have been brought together to make this trainer the right choice for any new budding pilot.
Seagull have designed this INNOVATOR to include a clever modular fuselage and a two piece wing along with a detachable tail plane assembly to help make this 55inc model pack away into the smallest of cars
"small enough to sneak away with you on holiday"
Seagull have used a cunning design for mounting the rudder and elevator servos direct to the tail fins, giving a direct control system that make this INNOVATOR one of the smoothest and precise trainers you will ever fly. Seagull have designed this INNOVATOR using the very latest design programmes and using precise Laser cutting technology to give this model a strong yet light airframe to help withstand the stresses of flight and offering an exciting flying experience.

High torque starter developed for .90 size engine. Economical type. Mount the Hex Starter Shaft DF that you already had to save cost. Plain shaft , no adaptor. Includes Battery mounts.

Complete Heli Package as shown in photo, with K&S adaptor.

Every opportunity for adventure is inside. All you have to do is seize one. They stretch from a tiny, 7.5" span indoor flyer to the Convair Sea Dart — the only seaplane ever to break the sound barrier. Power options range from electric nano helis to glow- or electric-sport planes to gas-powered giants. And aircraft choices include all of the above, plus a .90 glow heli, the world's first jet fighter, a delta-winged "bullet" and a rotary-wing fighter with gear-mounted cannon.

Basing on the award-winning Aerofly Professional Deluxe flight simulator from Ikarus the EasyFly3 uses the same great technology, design, flight physics and graphics. The EasyFly3 offers a perfect flight simulation to all newcomers, advanced and professionals. The complete spectrum of the R/C model airplane hobby can be savoured in its exciting 3D- and breath-taking 360 degree photographic sceneries in all of its facets.

For those electric flight pilots who just wish for a simple to use, functional, 2-6 cell charger, the brand new LP6 from Bantam certainly fits the bill. With only 3 buttons, and a LCD display, the LP6 is an ideal charger for those who just wish to plug and play. With an impressive 50W output circuit, this tiny charger is capable of charging most every day electric flight packs, and the latest generation of receiver and transmitter packs. Fully compatible with the FlightPower V-Balancer, but also can link up with the Bantam PB6, the LP6 is a fully functioning high performance charger in a small package. Ideal for all pilots, for use in anything from indoor flying, to larger outdoor models.

Some technical specifications
1) isl 6 charges/discharges following battery types on main output Akku1:

1-30 cells Ni-Cd - automatic and combination programs = maintenance programs available!,
1-30 cells Ni-MH - NEW: automatic and combination programs = maintenance programs available!,
1-19 cells Lead-acid, lead-gel,
1-12 cells V 8.41 = Li-Fe (A123, Saphion),
1-11 cells Li-Io,
1-11 cells Li-Po.

Suitable for all Minicraft rotary tools & MB680 sensitive bench drill
Ideal for close up & detailed work
800mm long
Comes with 2.3mm collet and engraving sleeve
Will accept 3.2mm chuck

New product in box but the older type which still works great on the 91 SXH etc

Older Type Classic connectors used by Flightpower.
For 2-6 cell lipo packs. By keeping cells in balance, the life of each pack is extended and the peak performance of the pack can be realized. Plug your Flight Power Lithium battery pack directly into the module via the balance plug.
We suggest that you balance each pack prior to charging and then again after charging and prior to flight.

New 35 Mhz product but not so popular, this 5 channel JR reciever is suitable for indoor flying and slow flyer type models. Requires a standard Rx crystal

(New Item)