HSDJETS Super Viper V4 Foam Turbine Red Colour PNP With Smoke System

HSD


€1,399.99




Share this product


  • HSDJETS Super Viper V4 Foam Turbine Red Colour PNP With Smoke System

  • Specifications

    SPECIFICATIONS:

    Wingspan 1500mm (59.1in)
    Length 1663mm (65.5in)
    Flying Weight 6.5kg (14.3 lb)
    Turbine Engine SW60 6KG brushed / SW60B 6KG brushless (required & not included)
    Cruising speed 250 km/h
    Flying time 5 mins (full throttle)
    Wing area 34.28 dm2
    Wing load 189.6 g/dm2
    Main material 20 times EPO
    Painting surface matte paint
    Suitable experience level □Zero basis □Beginner □Intermediate ■Advanced
    PNP Assembly difficulty □☆10mins ■★☆30mins □★★60mins
    Suitable for ambient temperature 0℃~40℃
    Radio System 8 channel (required & not included)
    Control System MFC-2085
    Servos 25g×2 Metal gear with 480mm lead (left & right ailerons forward)
    25g×3 Metal gear with 190mm lead (Flap×2 & rudder×1 forward)
    25g×2 Metal gear with 80mm lead (elevator forward)
    12g×1 Metal gear with 300mm lead (Nose wheel steering forward)
    12g×1 Metal gear (360°lock Hatch cover forward)
    Recommended Battery 2S,7.4V,1800~2000mAh×2,LiPo with T type plug(required & not included)
    Ailerons Yes
    Flaps Yes
    Elevator(Horizontal tail) Yes
    Rudder(Vertical tail) Yes
    The smoke system Yes
    LED lights system Yes
    Electromagnetic brake system Yes
    Reinforced gyro Selective configuration (not included)
    Packaging / Size Packing Box + Outer Box(Card mark)/132.5×46×39.5(cm)
    CG (Centre of Gravity) 170mm from the leading edge of the Main Wing
    Landing Gears Metal electric retractable hydraulic landing gear×3
    Battery Charger LiPo battery charger (required & not included)

    PACKAGE INCLUDES:

    • Fuselage×1
    • Left Wing×1
    • Right Wing×1
    • Left Horizontal Stabilizer×1
    • Right Horizontal Stabilizer×1
    • Vertical Stabilizer×1
    • Nose×1
    • Cockpit canopy×1
    • Main wing carbon tube L=598mm external diameter 16mm×1
    • Horizontal Stabilizer carbon tube L=500mm external diameter 6mm×1
    • Sticker×1
    • Capping board×1
    • Accessories Bag 1 ×1
      • Nylon rocker arm of the servo ×2
      • Double sided sponge paper×1
      • Screw (HM4×35mm)×4 (Nose)
      • Screw (HM3×14mm)×2 (Wing)
      • Screw (HM3×10mm)×2 (Wing)
      • Screw (PA3×14mm)×4 (Engine)
      • Screw (PA3×10mm)×4 (Tail nozzle)
      • Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
    • Accessories Bag 2 ×1
      • L type 3mm inner six corner board hand×1
      • Screw (HM4×35mm)×4 (Nose)
      • Screw (HM3×14mm)×2 (Wing)
      • Screw (HM3×10mm)×2 (Wing)
      • Screw (PA3×14mm)×4 (Engine)
      • Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
    • Manual×1


    REQUIRES:

    • 6KG – 8KG Turbine (required & not included)
    • 8 channel radio system(radio & receiver) (required & not included)
    • 2S,7.4V,1800~2000mAh×2,LiPo with T type plug (required & not included)
    • LiPo battery charger (required & not included)

Recently Viewed Items