Humbrol Model Filler is a fine grade, putty-consistency filler supplied in a 31ml metal tube, for hairline cracks and gaps between plastic parts. It applies straight from the tube with no mixing. Once fully dry the fill is permanent and can be filed, sanded with fine grade sandpaper, and painted. Humbrol has been the modeller's standard for decades.

Key Features

• 31ml metal tube of putty-consistency filler, used straight from the tube
• Fills hairline cracks and gaps between plastic parts
• Touch dry in 1 - 2 hours; hard dry in 24 hours
• Permanent once dry, then file, sand and paint
• Panel lines and surface detail can be re-scribed after sanding

Ideal For

• Polystyrene and ABS plastics used in model kits
• Hairline seams on injection-moulded aircraft kits
• Armour and vehicle kits needing panel lines re-scribed

How to Use

Apply sparingly to the plastic with the edge of a blade, or use a cocktail stick for small areas and fine details. For deep gaps, two thin coats are preferable to one thick coat. Wipe away with a damp cloth while wet, as the filler is permanent once dry.

Warning: this product contains solvents and is classified as hazardous, so use it in a well-ventilated area. Recommended for ages 14 and over.