Jeti MUI-150 EX
is on back order
Share this product
- Jeti MUI-150 EX
The MUI EX sensors are designed to measure the voltage, current and depleted capacity of the connected battery in the model. The JETIBOX terminal is used to display the measured values and the DUPLEX 2.4GHz system is used for wireless information transmission.
The Duplex system uses the 2.4GHz band for communication, which allows data to be transmitted not only to the model to control it, but also back to the transmitter. The telemetric data acquired during operation is transmitted in real time and the current state of the measured values can be displayed on the JETIBOX LCD. MUI telemetry sensors allow you to measure voltages and currents in your model and transmit this information using the DUPLEX system (receivers and transmitter modules). Thanks to accurate current measurement, these sensors allow to monitor the depleted capacity of the measured battery. The MUI records the current throughput, its average and maximum value. It also offers accurate voltage measurement and recording of minimum and maximum values.
The JETIBOX terminal is used to set parameters and display measured values. MUI sensors allow you to set an audible alarm when the set parameter is exceeded. You can set this alarm to measure maximum current, minimum voltage and maximum depleted capacity. The acoustic signal is generated by the transmitter module via the built-in siren. The individual alarms are distinguished from each other for better recognition and assigned a morse code letter. The beeper will beep even if the JETIBOX is not connected. If you have a JETIBOX connected, the LCD will display what parameter has been exceeded. If more than one parameter is exceeded, the alarms and LCD displays alternate.
Dimensions 27x19x11 mm
Weight 25 g
Measured voltage range 0 - 60 V
Measured current range 0 - 150 A
Voltage measurement accuracy 0.1%
Current measurement accuracy 1%
Power consumption 32 mA
Supply voltage 5 - 8.4 V