MGB6928HV Brushless Servo

Mac Gregor


€99.99




Share this product


  • aero-icon heli-icon car-icon waterproof-icon metalgear-icon metalcase-icon
    • High Performance, Standard Size, High Voltage Digital Servo
    • High-Precision 7075 Aluminium Gear
    • Long-life Potentiometer
    • Full CNC Aluminium Case, with Anodised Purple Centre Case
    • High Quality Brushless Motor
    • Dual Ball Bearing
    • Waterproof
    • Suitable for 1/8,1/10 Nitro Car, upto 60CC Aeroplane, 600-800 Class Helicopter CCPM

    The MGB6928HV is a waterproof ultra high speed and torque brushless digital servo, part of MacGregor's range of high voltage servos designed for General use in RC Aeroplanes, Cars & Helicopters.

    MacGregor's HV servos are designed with motors and electronics that operate off the direct voltage of a 2-cell Li-Po, Li-Ion, or Li-Fe receiver battery pack. This eliminates the need for a regulator and lowers the chance for a power failure that can cause a catastrophic failure of your model. Also note that the HV servo specs are shown at the higher voltage (8.4V 2S LiPo) but will still operate on a standard 5-cell 6V NiCd, Ni MH battery with a reduction in performance of approximately 10% in speed and torque.

    MGB6928HV Full Specification Sheet - [ Download ]

    Dead band: 2µs
    Working frequency: 1520µs / 330hz
    Motor: Brushless Motor
    Gearset: Full Metal
    Spline: 25T
    Operating Voltage: 5.0 ~ 8.4V
    Operating Speed (6.0V): 0.08sec/60°
    Operating Speed (8.4V): 0.06sec/60°
    Stall Torque (6.0V): 22.2kg.cm
    Stall Torque (8.4V): 28kg.cm
    Dimensions: 40 x 20 x 40.9mm
    Weight: 69g (2.43oz)
    Connector Wire Length: JR 300mm
    Bearing: 2BB
    MGB6928HV Servo Drawing